Diameter Bar - Extruded Aluminum
Extruded Diameter Bar
Alloy 6061-T6511, ASTM B221
Density: .098, Standard Length —12 ft
Extrusion Saw Cutting
- tolerances: as close as +/-.005*
- RMS finish as low as 32*
- Capable of cutting a 4 to 1 diameter to length ratio
- 8" diameter maximum
Band Saw Cutting
- tolerances: as close as +.030/-.000*
- Up to 16” diameter
Trade named products typically in stock are SAPA’s new ACC-U-LINE ACC-U-Rod™, and Kaiser’s Select Precision Rod™ . Both offer tolerances tighter then Aluminum Association standards.
**Highlighted sizes below are carried in SAPA's ACC-U-ROD™ with tolerances nearing that of Cold Finished bar.
| Dimension | Tolerances | Pounds per Ft |
|---|---|---|
| 0.250 | +/-.008 | 0.058 |
| 0.375 | +/-.004 | 0.129 |
| 0.500** | +/-.003 | 0.230 |
| 0.625** | +/-.003 | 0.361 |
| 0.750** | +/-.003 | 0.520 |
| 0.875** | +/-.003 | 0.707 |
| 1.000** | +/-.003 | 0.924 |
| 1.063** | +/-.004 | 1.043 |
| 1.125** | +/-.004 | 1.169 |
| 1.188** | +/-.004 | 1.303 |
| 1.250** | +/-.004 | 1.443 |
| 1.313** | +/-.004 | 1.590 |
| 1.375** | +/-.004 | 1.746 |
| 1.500** | +/-.005 | 2.078 |
| 1.625 | +/-.005 | 2.439 |
| 1.750 | +/-.005 | 2.828 |
| 1.875 | +/-.005 | 3.247 |
| 2.000 | +/-.007 | 3.695 |
| 2.125 | +/-.007 | 4.171 |
| 2.250 | +/-.007 | 4.676 |
| 2.375 | +/-.007 | 5.210 |
| 2.500 | +/-.007 | 5.773 |
| 2.563 | +/-.007 | 6.067 |
| 2.625 | +/-.007 | 6.365 |
| 2.750 | +/-.007 | 6.985 |
| 3.000 | +/-.007 | 8.313 |
| 3.125 | +/-.012 | 9.019 |
| 3.250 | +/-.012 | 9.756 |
| 3.300 | +/-.012 | 10.058 |
| 3.375 | +/-.012 | 10.520 |
| 3.500 | +/-.012 | 11.314 |
| 3.750 | +/-.012 | 12.989 |
| 4.000 | +/-.017 | 14.778 |
| 4.060 | +/-.034/-000 | 15.368 |
| 4.125 | +/-.017 | 15.716 |
| 4.250 | +/-.017 | 16.683 |
| 4.500 | +/-.017 | 18.703 |
| 4.750 | +/-.017 | 20.840 |
| 5.000 | +/-.017 | 23.091 |
| 5.060 | +/-.063/-000 | 23.970 |
| 5.250 | +/-.022 | 25.458 |
| 5.500 | +/-.022 | 27.940 |
| 5.750 | +/-.022 | 30.540 |
| 6.000 | +/-.022 | 33.250 |
| 6.081 | +/-.088/-000 | 34.650 |
| 6.250 | +/-.022 | 36.079 |
| 6.500 | +/-.022 | 39.023 |
| 6.750 | +/-.022 | 42.083 |
| 7.000 | +/-.022 | 45.258 |
| 7.250 | +/-.022 | 48.555 |
| 7.500 | +/-.022 | 51.955 |
| 8.000 | +/-.054 | 59.113 |
| 8.500 | +/-.054 | 66.732 |
| 9.000 | +/-.054 | 74.814 |
| 10.130 | +/-.074 | 94.638 |
| 11.000 | +/-.074 | 111.800 |
| 12.000 | +/-.084 | 133.000 |
| 12.125 | +/-.084 | 135.720 |
| 12.500 | +/-.084 | 144.240 |
*capable of cutting a 4 to 1 diameter to length ratio
*8” diameter maximum.
Tolerances listed may vary from manufacturer.